Batterien-2026 EN

ZENITH chargers F or AGM / S ilicon / G el batteries / O ptima batteries These high-frequency chargers are preprogrammed with regard to the charging characteristic curve for sealed AGM/gel batteries (IUoP). If you are using lead/acid wet batteries and Optima batteries, we will be happy to adjust the charging characteristic curve for you, but this must be specified when ordering. The charging power can also be ad- justed within specified limits (depending on the charger). However, this is only necessary if it exceeds the specifications of the battery ma- nufacturer. Despite fluctuating or low input voltage (185–265 V, 47–62 Hz), e.g., at the end of the jetty or behind endless extension cables, the output power is always the same. Thanks to high-frequency techno- logy, these chargers are lightweight and compact and can be installed in boats or used as tabletop devices. These devices are equipped with a 2 m power input cable with a 16 A Schuko plug and a 2.5 m charging cable (without battery clamp). The operating temperature is –10° to +55°C. A counter voltage of 1 V per cell is required to start the charging function. volt Amp. Order No. 24 20 56 7527 * These chargers are suitable for lead-acid, calcium/WET, AGM, gel, LiFePO4 (lithium), and start/stop batteries . All chargers are 100% safe and protected against reverse polarity, and are equipped with multi-stage charging to extend battery life. 901270 and 901271 are IP65 waterproof. Input voltage: 220-240V Scope of delivery includes alligator clips and ring eyelet adapters. No. 90 1273 only alligator clips. ECOBAT - C hargers volt Maximum charging current for batteries Order No. 6 / 12 V 4 amps. Lead, AGM, gel 90 1270 12 V 8 amps. Lead, AGM, gel 90 1271 12 / 24 V 16 / 8 amps. Lead, AGM, gel, LiFePO4 ++ 90 1272 12 / 24 V 25 / 12.5 amps. Lead, AGM, gel, LiFePO4 90 1273 ++ Only 12V possible with LiFe PO4 batteries C hargers for L i F e PO4 batteries These LiFePO4 battery chargers are waterproof according to IP65. Input voltage: 100 - 240V volt max charging current LxWxH mm Weight Order No. 12 V 10 amps. 220 x 90 x 54 1.5 kg 56 7585 * 24 V 7 amps. 210 x 90 x 52 1.5 kg 56 7584 * 24 V 12 amps. 265 x 93 x 55 2.8 kg 56 7586 * AL300 P ro plug - in charger The plug-in charger, which is designed for continuous charging/ winter storage of lead-acid batteries, automatically charges your lead-acid battery safely and reliably and prevents harmful deep discharge. As soon as the final charging voltage is reached, the elec- tronic control automatically reduces the charging current. This protects the battery from harmful overcharging. A charge control and polarity indicator provide information about the correct operating status. Also suitable for maintenance--free lead/lead-gel batteries. With output voltage selector switch for 2V/6V and 12V. Technical data: Operating voltage 230 V/50 Hz, final charging voltage 2.3 at 2V, 6.9 at 6V, and 13.8 V at 12 V batteries. Charging current max. 300 mA 56 6318 This high-frequency system is suitable for lead-acid, AGM, gel, and Li-Po4 batteries . The charging curve can be switched on the LCD screen, which also displays the charging current, voltage, charging time, etc. It is protected against reverse polarity, short circuit, and o v e r v o l t a g e ( ), IP30. Delivery includes 230V plug and Anderson connector. Quick Power Clamps 90 1115 are available as an option. Dimensions: 180x310x100mm, 3.5kg volt Maximum charging current Order No. 12-48 V 15 - 30 amps. 90 1287 CBHF2-M 12-15, CBHF2-M 12-20, CBHF2-M 12-25, CBHF2-M 12-30 CBHF2-M 24-15, CBHF2-M 24-20, CBHF2-M 24-25, CBHF2-M 24-30 CBHF2-M 36-15, CBHF2-M 36-20, CBHF2-M 36-25 CBHF2-M 48-15, CBHF2-M 48-20 *While supplies last. *While supplies last. Aces charger for LiFePO4 batteries 48/25A 90 1292 BATTERIES / CHARGERS 6