Epropulsion_EN

communication cable Scope of delivery: one cable and two com- munication terminals. 0,5 m 90 1445 5,0 m 90 1447 Communication termination / terminator 90 1440 Power connection cable for E60 and E163 for parallel connection 0,45 m 90 2427 1,50 m 90 2428 5,00 m 90 1410 E-battery remote switch 5m 90 1441 connection adapter Due to the new +/- connections on the bat- teries, adapters are required for the standard cable. Use these to connect the power cables of a motor or charger from the previous gene- ration to the battery. 90 1448 Charger 25 amps, 220V For E60 and 163, including cable 90 1444 Parallel connection of E-series batteries Up to 16 batteries of the same capacity and generation can be connected together. Before you can connect the batteries together, they must be fully charged. Connect the two positive and negative poles with a power cable. Then connect the communication cable to the CAN-OUT port on the first battery, the so-calledmaster battery, and to the CAN-IN port on the second bat- tery. Finally, a communication termination must be connected to the free CAN-IN port on the master battery to close the circuit. Instead of the communication termination plug, the remote switch can also be used, as it already has an integrated termination. Now connect the motor's power and communication cables to the battery. Only switch on the master battery; all other connected batteries will start automatically. To charge the batteries connected in parallel together, connect the charger to the last battery in the series, at the CAN-OUT connection. This should be the only battery with a free CAN-OUT connection. Power connection cable connection adapter Motor communication cable, Power/connection cable in the Scope of delivery of the motor included ENGINE communication cable communication agreement or remote switch To be ordered separately: Exchangeable head with lighting 90 2438 Y cable for parallel connection Chargers 90 2432 Communication cable 1.5 m 90 2459 e-battery charger Professional integration into existing or newly planned systems in accordance with the latest ISO standards (ISO 13297, ISO 16315, etc.) Generation 1 A battery series for high range To meet the demand for greater battery ca- pacity To meet the needs of our commercial custo- mers, we have developed the E-series LiFePo4 batteries. These have a capacity of 2048 Wh. They can maintain 80% capacity for 3,000 cycles at 80% DoD. The E-series batteries are suitable for both commercial users and boat owners with higher range requirements. E-SERIES C:95 M:60 Y:0 K:0 R:0 G:102 B:204 Technical specifications E 40 Battery type LiFePO4 capacity 2048 Wh Maximum discharge current 40 A rated voltage 51,2 V Serial connection no parallel connection up to 16 pieces Charging time at 220V 2 hours charging cycles 3,000 cycles at 80% DoD Weight 28 kg dimensions 420 x 390 x 207 mm Suitable for Spirit 1.0 series, Pod Drive 1.0 Order No. 90 1260 * * while supplies last 23 E-SERIES BATTERIES ACCESSORIES