JOI 2025

Subject to errors and technical changes QUICK STACKER RELEASE Holding force 1 - 4.5 kg 59 7955 The easiest way is to clamp the Quick Stacker Release to the loose downrigger cable. Place a loop of the wire rope around the middle peg and hold it in the groove. When the wire rope comes under tension, it will lie in the grooves of the outer pins. When lowering the weight on the wire rope, push the clamp upwards until it has reached the desired height (usually 3 m). Pull the fishing line between the holding jaws The pull of your fishing line on this clamp ensures that it sits firmly on the wire rope and does not slip any further. Notes for the stacker terminals UNIVERSAL STACKER RELEASE With two clamps. Holding force 0.9 to 10 kg, enables simultaneous fishing with one weight at several depths. Lower the weight approx. 3 to 4.5 m, attach the first clamp to the wire rope and slide your fishing line into the second clamp. 59 7950 Protective cover for all models with Velcro fastener black 59 7976 white 59 7977 UNIVERSAL LINE RELEASE Holding force 1 to 10 kg. 59 7940 QUICK RELEASE - Holding force 1 to 4.5 kg 59 7945 DOWNRIGGER ACCESSORIES RELEASE CLAMPS FOR MOUNTING ON DOWNRIGGER WEIGHTS/CABLES Application: these clamps work best when they are clipped directly to the weight or to the downrigger cable for stacker releases. Simply clamp the fishing line between the holding jaws. The further back you clip the line, the greater the holding force. Adjust the holding force to the tensile strength of your line. Quick and easy to attach, even with strong boat movements. No more damaged fishing lines due to twisting or tangling. The holding force can be easily adjusted as required using an adjusting screw. A universal release clamp with one-hand operation and locking adjustment of the holding force from 1 to 10 kg. For lines of all strengths, for salt and fresh water. Perfect for slow trolling live bait or fishing for gently biting zander. Turn the adjustment knob to change the holding power: (+) for higher, (-) for lower holding power. Slide the fishing line between the holding jaws and close the clamp. Increase the holding force with each "click". To open, slide the arms of the clamp apart Quick Release Universal Release OFFSHORE STACKER RELEASE Holding force up to 12.6 kg Lower the weight approx. 3 to 4.5 m. Attach one clamp to the wire rope of the downrigger and clamp your fishing line to the other. 59 7956 OFFSHORE LINE RELEASE, Holding force up to 12.6 kg 59 7943 If not usingfor a longer period of time, clamp a pi- ece of paper or plastic between the holding jaws of the clamps to prevent them from sticking together. When using the clamps for the first time of the day, move them slightly towards each other befo- re opening the holding jaws to prevent them from sticking together. Special pins prevent the fishing line from getting caught behind the holding jaws of the clamp. Offshore Release OFFSHORE SALTWATER LINE RELEASE Holding force up to 12.6 kg, corrosion-resistant, for stronger saltwater fishing lines 59 7944 70 DOWNRIGGER ACCESSORIES