JOI 2026 EN

Errors and technical changes excepted. QUICK STACKER RELEASE Holding force 1 - 4.5 kg 59 7955 The easiest way is to clamp the Quick Stacker Release to the slack downrigger cable. Place a loop of the wire rope around the middle pin and hold it in the groove. When the wire rope is under tension, it will settle into the grooves of the outer pins. When lowering the weight on the wire rope, push the clamp upwards until it reaches the desired height (usually 3 m). Pull the fishing line between the retaining jaws. The pull of your fishing line on this clamp secures it to the wire rope and prevents it from slipping further. Notes for stacker terminals UNIVERSAL STACKER RELEASE With two clamps. Holding force 0.9 to 10 kg, allows simultaneous fishing with weights at multiple depths. Lower the weight approximately 3 to 4.5 m, attach the first clamp to the wire rope, and slide your fishing line into the second clamp. 59 7950 protective cover For all models with Velcro fasteners black 59 7976 59 7977 UNIVERSAL LINE RELEASE Holding force 1 to 10 kg. 59 7940 QUICK RELEASE - Holding force 1 to 4.5 kg 59 7945 DOWNRIGGER ACCESSORIES RELEASE CLIPS FOR MOUNTING ON DOWNRIGGER WEIGHTS/CABLES Application: These clamps work best when clipped directly onto the weight or, in the case of stacker releases, onto the downrigger cable. Simply clamp the fishing line between the retaining jaws. The further back you clamp the line, the higher the holding force. Adjust the holding force to the breaking strength of your line. Quick and easy to attach, even when the boat is moving around a lot. No more damaged fishing lines due to twisting or tangling. The holding force can be easily adjusted as required using an adjusting screw. A universal release clamp with one-handed operation and snap adjustment of the holding force from 1 to 10 kg. For lines of all thicknesses, for salt and fresh water. Perfect for slow trolling live bait or fishing for gently biting zander. Turn the adjustment knob to change the holding force: (+) for higher, (-) for lower holding force. Slide the fishing line between the holding jaws and close the clip. Each "click" increases the holding force. To open, push the arms of the clip apart. Quick Release Universal Release OFFSHORE STACKER RELEASE Holding force up to 12.6 kg Lower the weight approximately 3 to 4.5 meters. Attach one clamp to the downrigger's wire rope and clamp your fishing line into the other. 59 7956 OFFSHORE LINE RELEASE, Holding force up to 12.6 kg 59 7943 If you are not going to use the clamps for a long time, place a piece of paper or plastic between the clamp jaws to prevent them from sticking together. When using the clamps for the first time each day, move the jaws slightly against each other before opening them to prevent them from sticking toge- ther. Special pins prevent the fishing line from get- ting caught behind the clamp jaws. Offshore release OFFSHORE SALTWATER LINE RELEASE Holding force up to 12.6 kg, corrosion resistant, for stronger saltwater fishing lines 59 7944 70 DOWNRIGGER ACCESSORIES